X2 Wave Flamer

IMPOSING FLAME PROJECTOR

The X2-Wave-Flamer combines a fluid driven flame system, with moving-head-technology, in a compact device. Fitted with a motorized and swiveling head, the X2-Wave-Flamer allows for very fast and precise flame bursts of up to 10 meters in height. All in a radius of 210°.

The resultant "Flame Pictures" open a whole new slew of possibilities when creating in- or outdoorshows. For easy handling, the liquid fueled projector features a bidirectional radio control, a removable 10L fuel canister, as well as an integrated display with menu and control buttons.

Optionally, in addition to the radio control, the flame projector X2-Wave-Flamer can also be controlled via DMX. The high resolution allows you to drive to almost every angle.


X2: Bidirektional
RX: Das Gerät ist ein Empfänger.
BIOETHANOL: Es wird Bioethanol oder Isopropylalkohol benötigt.
230V: Wird mit Netzspannung betrieben.

Optional EXT. BAT

With the optional batteryconnector, it is possible to supply the flame projector with an external battery, and have it not be connected to a mains supply.


FEATURES
  • Never before seen usage of flame effects.
  • Large movement radius and effect height.
  • Integrated tripod holder.
  • Control via radio or DMX.
  • Multiple safety features (eg: Pressure control, locking angles...)
  • Cheap and easily accessible fuel (eg: Bio-ethanol).
  • Multiple accessories available (eg: Indoornozzle for reduced effect height)
Effect height:Up to 10 meters
Swivel radius:-105° bis 105°
Radio range:800m
Measurements:560 x 335 x 365mm
Weight:27kg (empty fuel canister)
Power Supply:110-230VAC
Case:Stainless steel
Fuel:Isopropylalcohol, Bio-Ethanol, Isopar-G


Current software and manual for this product:

Attention: Please note that there are multiple hardware versions for this product, who will need a different software. Always make sure to load the correct software onto the right product. Should you not be sure which update to select, please do not hesitate to contact us.


Difference 256 and 128.

Normally the version 256 is used. However, some earlier models use the version 128. You can differentiate the two circuitries, by checking whether the device has three middle aligned red LEDs at the LED display. Should these be there, use version 256. 

Difference X2, V2 und V1

The Wave Flamer is also available in the unidirectional version V1 and the predecessor of the X2 System, the V2.




WEITERE PRODUKTE

RX2-30K in case

RX2-30K in case

Timecode Modem

Timecode Modem

CO2-Jet 230V

CO2-Jet 230V

GX2 12V

GX2 12V

X2 Power Flame

X2 Power Flame

SFX Torch

SFX Torch