SP2 Connector

The Splittbox SP2-20K is used to extend the existing channels of a receiver further away form the device itself. With this, up to 60 channels of a receiver are connected via the so called Splittbox cable to the Splittbox.

The connections for the Splittboxes can be built into the RX2-30K, as well as the RX2-70K. Normally the channels 1-70 are used at both devices for this. This means an extension of 30 channels for the RX2-30K.

The Splittbox connectors are fitted with a protective cap, to prevent dirt from entering.

• Splittbox connectors for 3x 20 channels.
• Channelextension for the RX2-30K.
• Protective caps included.
• Refitting older devices is always possible.